The Enerblue Black HT EVO is a range of reversible high-temperature air source heat pumps developed for commercial buildings, refurbishment projects and industrial process applications that require elevated water temperatures.
Capable of delivering water temperatures up to 80°C and operating in outdoor ambient conditions as low as -20°C, the Black HT EVO provides a heating and cooling solution for buildings with demanding temperature requirements.
As Enerblue’s UK partner, Pure Thermal supplies the Black HT EVO range alongside application advice, technical selection support, commissioning and ongoing maintenance services.
High-Temperature Heating and Cooling from a Single System
The Black HT EVO is designed for applications where conventional lower-temperature heat pumps may not meet existing heating system requirements.
Using R513A refrigerant with an A1 safety classification, the range provides both heating and cooling through a reversible two-pipe configuration.
The ability to deliver water temperatures up to 80°C makes the Black HT EVO particularly suitable for commercial heating systems, building refurbishment projects and process applications where higher flow temperatures are required.
Key specifications include:
- Water temperatures up to 80°C for high-temperature heating applications.
- Operation in ambient conditions down to -20°C, subject to operating conditions.
- Reversible heating and cooling from the same two-pipe platform.
- R513A refrigerant with an A1 safety classification.
- Nominal heating capacities from approximately 33.1kW to 201kW across the specified 12-model range.
- Standard, Low Noise and Super Low Noise configurations to meet different acoustic requirements.
These features provide flexibility for consultants, contractors and building operators selecting equipment for higher-temperature heating and cooling systems.
Designed for Commercial and Industrial Applications
High-temperature air source heat pumps can be particularly useful in refurbishment projects where existing heating infrastructure has been designed around elevated water temperatures.
Replacing traditional heating equipment with a lower-temperature heat pump may require additional changes to heat emitters, pipework or other system components.
The Black HT EVO provides an alternative for projects that need higher water temperatures while moving away from conventional fossil-fuel heating systems.
Typical applications include:
- Commercial offices and large buildings.
- Public sector and educational facilities.
- Industrial process heating and cooling.
- Building refurbishment and heating system replacement.
- Commercial infrastructure with demanding heating loads.
- Sites with specific noise restrictions.
The availability of Low Noise and Super Low Noise versions also allows acoustic performance to be considered during equipment selection, particularly where units are positioned near occupied buildings or noise-sensitive areas.
Black HT EVO Heat Pumps Installed at Dublin Airport
The Black HT EVO is already being used in major commercial infrastructure projects, including an installation at Dublin Airport’s Terminal 2.
The project involved the installation of three Enerblue Black HT EVO 180 high-temperature heat pumps, providing a combined 320kW space-heating load.
The units supply heating to air handling equipment serving the terminal’s baggage area.
Each unit uses R513A refrigerant and incorporates Enerblue’s high-temperature heat pump technology to meet the site’s heating requirements.
Manager Pro Cascade Control
The three Black HT EVO units are managed through Enerblue’s Manager Pro cascade control system.
This allows the heat pumps to operate together, with heating capacity adjusted according to demand.
The cascade arrangement also supports the management of individual compressor circuits and defrost cycles, helping maintain heating output during changing outdoor conditions.
By coordinating multiple heat pumps, the system provides a practical approach to meeting larger commercial heating loads.
The Dublin Airport installation demonstrates how high-temperature air source heat pumps can be incorporated into existing commercial infrastructure where higher water temperatures and consistent heating are required.
Supporting Commercial Heating Refurbishment Projects
For many commercial buildings, heating system refurbishment presents challenges relating to available space, electrical infrastructure, existing heat emitters and required flow temperatures.
High-temperature heat pumps provide another option for project teams assessing how to replace conventional heating systems.
The Black HT EVO range is particularly relevant where:
- Existing heating systems require higher water temperatures.
- Both heating and cooling are required.
- Building operators want to reduce dependence on fossil-fuel heating.
- Acoustic performance forms part of the project specification.
- Refrigerant safety classification is an important consideration.
With heating capacities reaching 201kW in the current published range, multiple units can also be configured to meet larger heating demands.
Selecting the correct arrangement requires consideration of the building’s heating load, design temperatures, available electrical supply and intended operating conditions.
Enerblue Heat Pumps from Pure Thermal
Pure Thermal works with Enerblue to provide commercial and industrial heat pump solutions across the UK.
The Black HT EVO forms part of a wider range of high-temperature heat pumps available for projects requiring elevated flow temperatures and specialist heating applications.
Pure Thermal can assist consultants, contractors and building operators throughout the project, including initial performance assessments, equipment selection, system design support, commissioning and ongoing maintenance.
For commercial refurbishment, industrial heating or projects requiring reversible heating and cooling, the Black HT EVO provides an established air source heat pump option.
Contact the Pure Thermal applications team on 020 3488 4618 or email info@purethermal.co.uk to discuss your project requirements and learn more about the Enerblue Black HT EVO range.